The Best Acrylic Tubing Water Cooling 12 Mm

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

Using metric size fittings? The Bykski Acrylic tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!

Features

• Easy to Cut
• High Transparency
• Easy to Bend

Specifications

• Inner Diameter (ID): 12mm
• Outer Diameter (OD): 16mm
• Wall Thickness:2mm
• Length: 750mm
• Pack Size:4

Compatibility
• Fittings:16mm OD Rigid

Parts Included

• 4 Pieces of 750mm Acrylic  tube

Warnings

With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Acrylic Tube works with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.

Not responsible for any damage caused by or when using this product. Please use at your own risk.

InstallationPLEASE NOTE: A bending insert is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below:1. Stretch the bending insert. Remove any excess that isn’t stretched.2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that’s all you have). This will ensure a clean opening for easier insertion.3. Lubricate by applying several drops of dish soap, olive oil, or Tube Lube on the bending insert itself and then place several more drops into the rigid tube.4. Work the bending insert into the rigid tube. The more you use the insert, the easier this process will become.

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

Corsair Hydro x series XT hardline tubing completes the connections between your Hydro x series custom cooling equipment, putting your coolant on display with crystal-clear PMMA tubing. Built to last under high pressure and High coolant temperatures, while still easy to cut with a standard fine-toothed hacksaw (not included). Tech Support # 1-888-222-4346 opt #1

Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.

Model: TR-3831109841396-4P

PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting.

Measure – Cut – Bend – Install – DONE!

Specifications:

• Inner Diameter: 12mm
• Outer Diameter: 16mm
• Wall Thickness : 4mm

Warnings/Cautions:With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Features:
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 12mm rigid tubes. 12mm supporting tube outer diameter, 12mm acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
Specification:
Material: ABS
Color: Black
Tube OD: 12mm / 0.47inch
Size: approx. 9 * 7 * 1.9cm / 3.54 * 2.76 * 0.75inch

Package list:
3 * Rigid Tube Bender Mould